Bathrooms

The bathroom may be a small space, but a few changes in what you do with it and in it can add up to significant savings in energy and money.

  • Open an empty, half-gallon cardboard milk carton and hold it up to the shower while it's fully on. If it fills in less than 10 seconds, your shower could use an energy-efficient showerhead. You'll get the same pressure with a smaller volume of water, and you'll save energy too.
  • Take showers instead of baths. A shower saves four to five gallons of water.
  • Be aware of your water use habits. Don't let water run constantly while you're shaving. Turn off the tap when you brush your teeth and save 7-12 liters of water per minute.
  • Be sure your faucets are shut off tightly, especially the hot water. Repair leaking hot water faucets. A leak of one drop per second wastes over 250 gallons of hot water a month. It's a simple, low-cost job to do.
  • Install a flow restrictor on your shower. This device can cut the cost of taking a hot shower in half. It generally costs less than a dollar, is easily inserted into the showerhead, and cuts the flow of water virtually in half.
  • Make sure that your bathrooms have good ventilation fans. This will ensure better indoor air quality and moisture control. ENERGY STAR® fans use 65% less energy and run quieter. Adding a programmable timer or humidistat control will help maintain ventilation without excessive energy use.


This information was obtained by PSNC Energy from various third party sources. These sources, and the information obtained from them, will be provided to you on request to PSNC Energy. PSNC believes the information to be accurate and complete, but has not verified or confirmed the information. Before relying on this information, you should independently verify its accuracy and completeness.

Facebook Twitter YouTube